Package size & Color
200gm
ThreeBond 3301E (Electro-Conductive Bonding Agent)
The conductive bonding agent, ThreeBond 3301E. It has a rubber-like state after curing and great flexibility.
Features
- Bonding electronic parts
- For spot bonding
- Excellent thermal aging
- Solvent type.
- Good adhesion to various materials, such as copper, silver plating, tin, aluminium, glass, ceramics (alumina), phenol, Glass-epoxy, polyester film, and polyamide.
Application
- It is developed for crystal oscillators and other electronic parts that require electro-conductivity.
Package size & Color
200gm
ThreeBond 3301F (Electro-Conductive Bonding Agent)
The conductive bonding agent, ThreeBond 3301F. It has a rubber-like state after curing and great flexibility.
Features
- Shrinkage ability during cure has low effect on the crystal blank due to the elastic property of the cured resin.
- The elastic property of base resin allows large change in temperature range during use.
- Low viscosity type, hence, allowing ease in application by barrel or auto-applicator.
Application
- It is developed for crystal oscillators and other electronic parts that require electro-conductivity.
Package size & Color
200gm
ThreeBond 3302B
ThreeBond 3302B is a one-component modified urethane conductive adhesive.
Features
- Curable at 150 °C in 30 min.
- Becomes a flexible cured material.
Application
- Connection of piezoelectric elements and electrodes of crystal units, crystal oscillators, and surface acoustic wave filters.
- Conductive adhesion by spot bonding of other parts, and conductive fixing of chip components.
- It is developed for crystal oscillators and other electronic parts that require electro-conductivity.
Package size & Color
200gm
ThreeBond 3303B (Electro-Conductive Bonding Agent)
The conductive bonding agent, ThreeBond 3303B. It has a rubber-like state after curing and great flexibility.
Features
- Shrinkage ability during cure has low effect on the crystal blank due to the elastic property of the cured resin.
- The elastic property of base resin allows large change in temperature range during use.
- Elastic property is maintained even after heat aging. Hence, it manifests good heat resistance.
- Low viscosity type, hence, allowing ease in application by barrel or auto applicator.
Application
- It is developed for crystal oscillators and other electronic parts that require electro-conductivity.
Package size & Color
100gm
ThreeBond 3305B (Adhesive For Magnetic Head Of Hard Disk Drive)
ThreeBond 3305B is an adhesive developed for assembling magnetic head in HDD, etc. Removes static electricity when joining slider core and suspension and prevents static electricity on magnetic head.
Features
- This adhesive temporarily fixes slider core by UV irradiation. And bonds HDD magnetic head upon heating.
- As the hardened adhesive has a soft Young modulus (bend ability ratio), unlike existing adhesives crowning hardly occurs.
- Silver powder is kneaded into the resin; therefore it features removal of amount of static electricity conductivity.
Application
- Bonds slider core and suspension of magnetic head.
- Removes static electricity from suspension of magnetic head.
Package size & Color
10gm
ThreeBond 3310C (Electro-Conductive Adhesive)
ThreeBond 3310 is an electro-conductive adhesive of single fluid, thermosetting type, characterised by quick hardening at elevated temperature. Unlike ThreeBond 3380B, there is no need of weighing or mixing before use.
Features
- General bonding
- Does not contain any solvent
- Minimum or no outgas when heated at 85°C after curing at 85°C for 3 hour
Application
- For electrical parts that require electro-conductivity.
Package size & Color
50gm
ThreeBond 3350C (Room Temperature Curing Electro-Conductive Paint)
ThreeBond 3350C is a room temperature curing silver-based paint developed for electronic equipment and parts.
Features
- Good bonding ability to various adherent materials.
- Room temperature curing possible.
Application
- Bonding and fixing of terminals.
- Repair of circuits.
