DC Motor & Induction Motor
As the need for automation and labor saving increases, the number of small motors, which are key to their implementation, is also expected to increase. For the cases that requires high reliability, such as for robots, we can make proposals that are optimized for the operating environment.
Brushless-DC Motor
Smart phones that are now essential goods for daily living are composed of a lot of electronic components and modules and lots of glue.
Attachment of a cover panel to a display panel with a UV-curable sheet-like adhesive enables a screen to be easily watched, and use of a low-temperature curable/UV-curable sealant for a case can produce “waterproof and drip-proof” devices.
In addition, ThreeBond’s sealants and adhesives contribute to making smart phones and their electronic components and modules thinner and more sophisticated.
Smartphone
Smart phones that are now essential goods for daily living are composed of a lot of electronic components and modules and lots of glue.Attachment of a cover panel to a display panel with a UV-curable sheet-like adhesive enables a screen to be easily watched, and use of a low-temperature curable/UV-curable sealant for a case can produce “waterproof and drip-proof” devices.In addition, ThreeBond’s sealants and adhesives contribute to making smart phones and their electronic components and modules thinner and more sophisticated.
Smart Watch
Many adhesives are also used in typical wearable devices, such as smartwatches. Electronic parts and modules that are equipped in smart watches are similar to those for smart phones and tablets, however, needs for adhesives change little by little due to downsizing. Among them, “fine application to small-size electronic parts” , “heating prevention” and “waterproofing and drip-proofing” can be named as needs.
With our technology and products that have been cultivated over many years, ThreeBond’s sealants and adhesives can meet all needs.
With our technology and products that have been cultivated over many years, ThreeBond’s sealants and adhesives can meet all needs.
Camera Module
A lot of adhesives are used for small-size camera modules installed in smart phones and tablets.
Since the number of manufactured small-size camera modules is large, adhesives that cure fast at low temperature are needed to shorten the manufacturing processes.
ThreeBond can provide a lineup of products, each of which is suitable to the desired location, to meet customer needs.
Since the number of manufactured small-size camera modules is large, adhesives that cure fast at low temperature are needed to shorten the manufacturing processes.
ThreeBond can provide a lineup of products, each of which is suitable to the desired location, to meet customer needs.
Digital Camera
A lot of adhesives are used for the mechanical components of cameras including a single lens reflex camera. As the design of a camera has been smaller and thinner, UV-LED light source-curable adhesives are needed in order to bond a different type of material to another, to reduce the amount of heat applied to materials, and to reduce power consumption in camera manufacturing processes.
ThreeBond develops and manufactures adhesives that are the most appropriate to a customer’s manufacturing processes and provide such products on a global basis.
ThreeBond develops and manufactures adhesives that are the most appropriate to a customer’s manufacturing processes and provide such products on a global basis.
Surveillance Camera
In recent years, increasing awareness of global security has been accompanied by spreading adoption of surveillance cameras as a deterrent to crime and terrorism.
For many years, our UV-curable resin has contributed to security cameras, mainly to the adhesive application for optical parts. Increasing numbers of pixels in recent years have brought an increasing need for “thermal conductivity” as protection against overheating, and for “Sealants” as waterproofing and protection from insects.
For many years, our UV-curable resin has contributed to security cameras, mainly to the adhesive application for optical parts. Increasing numbers of pixels in recent years have brought an increasing need for “thermal conductivity” as protection against overheating, and for “Sealants” as waterproofing and protection from insects.
Wireless Earphone
Wireless earphones are used for listening to music as well as during web conferences as telework becomes more prevalent, so production levels are increasing significantly. Furthermore, as earphones become more expensive, consumers expect them to last longer, so adhesives must improve productivity through “fast curing” and high reliability with a focus on “impact resistance”.
Sensor / MEMS Device
Sensors and MEMS devices are used in a wide range of applications. As automation advances as a substitute for the five senses of human beings, adoption of these devices is expected to further increase. At ThreeBond, we propose the optimal products for sensors and MEMS devices that require high reliability.
5G Base Station
Stations for 5G communication are starting to be set up everywhere, even outdoors, so adhesives must be incredibly reliable to ensure operation continues despite weather conditions. Our lineup includes case sealants, thermally conductive materials used to protect electronic substrates from heat and more.
Optical Transceiver
The spread of 5G communications has greatly increased the amount of data flying around the world. As for optical transceivers needed for high-speed communications, we have a wide range of products, mainly UV resins and heat-conducting materials for parts requiring precision fixation.
Car Mounted Display / Camera
The number of on-board automobile displays and cameras have continued to increase as automotive electronics and safety performance improve. In the automotive field, heat resistance and reliability must be higher than for general electronic equipment. ThreeBond utilizes our accumulated know-how to develop and produce adhesives and sealants that contribute to technological innovation in the automotive industry.
Battery
ThreeBond has commercialized a lot of sealants that are applied to the junction surface of various types of flanges, screws, etc. of transportation equipment and industrial equipment to air-tighten and seal the inner fluid. Also in the battery field, the company uses its know-how about sealants to thereby provide sealants for various types of batteries including alkaline batteries. Furthermore, in recent years, ThreeBond’s sealants have been contributing to fuel cells and dye-sensitized solar cells that are paid attention to as the next-generation energy.
