A leading adhesive manufacturer
Welcome to ThreeBond, a renowned adhesive manufacturer serving various sectors and needs. As a distinguished name in the industry, we present a comprehensive array of top-notch adhesives tailored to your requirements. With our unwavering dedication to quality, state-of-the-art techniques, and rigorous standards, ThreeBond has become the go-to choice for professionals seeking effective adhesive solutions. Whether it’s automotive, construction, or diverse industrial applications, our cutting-edge technology and dependable products guarantee enduring performance. Count on ThreeBond, the preferred adhesive manufacturer, to provide unmatched solutions for all your bonding needs.
Package size & Color
80gm, 1kg
ThreeBond 1521 (Multi-Purpose Rubber Adhesive)
ThreeBond 1521 is a high-performance multi-purpose bonding agent made with synthetic rubber and synthetic resin.
Features
- It can withstand temperature up to 100°C after proper curing.
Application
- Use fingers, brush, spatula, spray gun or roller depending on size of surfaces.
- Remove moisture, oil, dust, rust, oxide film, etc. completely from the surface.
- For metal surfaces, scrape off rust, oxide film, etc. with fine sandpaper, and sandblasting.
- Bonding at room temperature.
Package size & Color
150gm, 460gm
ThreeBond 1530 (Single-Component, Moisture Cure Type Elastic Adhesive)
ThreeBond 1530 is a single-component elastic adhesive, which cures in the presence of moisture. The polymer material contains silyl functional group, which will react with the small amount of moisture to cure. This product is different in that 7 minutes after applying (23°C, 50% relative humidity), a strong adhesion is formed, without the use of temporary fixation.
There will not be low molecular weight cyclosiloxane produced during cure. Hence, it will not affect the electronic contact points.
Features
- Does not contain any solvent, environmentally friendly.
- Low odor, Single component, rapid curing.
- Does not require any light or heating equipment.
- Good initial strength, hence, does not require any temporary fixing.
- Elastic material. Hence, good peel strength, together with good impact and vibration resistance.
- Good adhesion to different adherents.
- Good adhesion with metal, plastic, rubber, wood and inorganic materials.
Application
- Bonding to different materials possible (multi-purpose). Sealing, molding and potting purpose.
- This can be used in similar applications as RTV silicone (sealant, potting agent).
Package size & Color
80gm, 4kg
ThreeBond 1541C (Water Soluble Adhesive)
Three Bond 1541C is a one component, water soluble adhesive which has a main ingredient of acrylic emulsion. It is specially modified to give faster setting time. Initial strength can be achieved at a shorter time.
Features
- Quick drying time
- Faster setting time
- One application on one side provides effective bonding
- Inexpensive. Small amount covers a wide area.
- Bonds styrene foam.
Application
- Bonding Purpose
Package size & Color
80gm, 1kg
ThreeBond 1561 (A Urethane Based Adhesive For Plastic)
ThreeBond 1561 is an extremely strong URETHANE BASED ADHESIVE for the use with plastic materials. It is distinct from other gum-based adhesive in that it has a clean finish. Their adhesive is particularly effective in soft plastic and bags. Being extremely soft it is also applicable to plastic sheets.
Features
- Effective for chloridation vinvyl ABS, Polycarbonate and plastic resin, especially soft chloridation vinvyl which adhere very well.
- High heat tolerance.
- Remains soft and manageable even after setting.
- Clear and smooth finishing.
- Effective on an initial adhesive.
- Its strength is not affected by the chemical contents of the plastic.
Application
- Plastic components and parts in car, electric appliances, buildings, shoes and toys.
- Use Chloridation Piper, interior of electric appliance, Chloridation processed goods, urethane rubber shoes, toys, plastic-based material, urethane synthetic leather, chloridation ball and umbrellas.solid gaskets.
Package size & Color
20gm
ThreeBond 1741
ThreeBond 1741 is a cyanoacrylate-based instant high-strength adhesive of solvent less single-fluid type. It polymerizes in a few seconds and binds strongly on almost all materials except for materials, which absorb the adhesive.
Features
- Instant bonding. Strong adhesion in only 5 to 30 seconds.
- No mixing, pressure or heat required.
- Strong adhesion at room temperature.
- Very small quantity required. Its relatively low viscosity allows good spread and penetration.
- Clean appearance. Bonding is colourless, transparent and clean.
Application
- For binding weather-strip rubber and door stop rubber.
- Firm fixing of the speed changer level.
- Suitable for bonding wood such as balsa or plywood. Also applicable to rubber, plastic, metal, ceramics and paper.
Package size & Color
20gm
ThreeBond 1743
ThreeBond 1743 is a cyanoacrylate-based instant high-strength adhesive of solventless single-fluid type. It polymerizes in a few seconds and binds strongly on almost all materials except for materials which absorb the adhesive.
Features
- Instant strong bonding.
- No mixing, pressure or heat required.
- Strong adhesion at room temperature.
- Very small quantity required. Its relatively low viscosity allows good spread and penetration.
- Clean appearance. Bonding is colorless, transparent, and clean.
Application
- For binding weather-strip rubber and door stop rubber.
- Firm fixing of the speed changer level.
- Suitable for bonding wood such as balsa or plywood. Also applicable to rubber, plastic, metal, ceramics and paper.
Package size & Color
20gm
ThreeBond 1747
ThreeBond 1747 is a cyanoacrylate-based instant high-strength adhesive of solventless single-fluid type. It polymerizes in a few seconds and binds strongly on difficult to adhere material surfaces.
Features
- Adheres difficult surfaces, with particularly excellent adhesion to rubber, plastic and metals.
- Instant bonding. Strong adhesion in only 4 to 25 seconds.
- No mixing, pressure or heat required.
- Strong adhesion at room temperature.
- Very small quantity required. Its relatively low viscosity allows good spread and penetration.
Application
- For binding weather-strip rubber and door stop rubber.
- Firm fixing of the speed changer level.
- Suitable for rubber, plastic and metal.
Package size & Color
20gm
ThreeBond 1782
ThreeBond 1782 cyanoacrylate based instant adhesive is a solventless single component type liquid which bonds rapidly at room temperature and demonstrates excellent properties such as impact and heat resistance.
Features
- Adhere difficult surfaces.
- Particularly excellent adhesion to rubber, plastic.
- Excellent curing speed. Good heat and impact resistance.
Application
- Bonding automotive components where heat and vibration always occur.
- Bonding the components of electronic products that require heat and impact resistance.
- Bonding vibrated portion of machinery such as bearing and motor.
Package size & Color
20gm
ThreeBond 1785G
ThreeBond 1785G is a cyanoacrylate-based instant high-strength adhesive of solventless single-fluid type. It polymerizes in a few seconds and binds strongly on almost all materials except for materials which absorb the adhesive.
Features
- Instant bonding. Strong adhesion in only 5 to 10 seconds.
- No mixing, pressure or heat required.
- Strong adhesion at room temperature.
- Very small quantity required. Its relatively low viscosity allows good spread and penetration.
- Clean appearance. Bonding is colourless, transparent and clean.
Application
- For binding weather-strip rubber and door stop rubber.
- Firm fixing of the speed changer level.
- Suitable for bonding wood such as balsa or plywood. Also applicable to rubber, plastic, metal, ceramics and paper.
Package size & Color
20gm
ThreeBond 1786E
General purpose cyanoacrylate-based instant adhesives are widely used for non-porous surfaces. It polymerizes in a few seconds and binds strongly on almost all materials except for materials which absorb the adhesive.
Features
- Sets rapidly. Bonds most wood within a minute.
- Strong initial strength. 5 minutes after application, an initial bonding strength of over 50kg/cm2.
- Easy-to-use. Non-solvent, single component. Requires no hardener, pressing or heating. Just hold objects lightly in place.
- Strongly bonds at room temperature.
- Transparent.
- Excellent for butt joints.
- Opens new area of application. Paper, leather, fibre, china, rubbers, plastics are also bonded.
Application
- For binding weather-strip rubber and door stop rubber.
- Firm fixing of the speed changer level.
- Suitable for bonding wood such as balsa or plywood. Also applicable to rubber, plastic, metal, ceramics and paper.
Package size & Color
100ml
ThreeBond 1797
ThreeBond 1797 as an exclusive primer for ThreeBond 1700 series (Instantaneous Adhesives).
Features
- Excellent adhesive performance to polypropylene, polyethylene and polyacetal. Effective also in application to EPT, polyurethane, soft PVC, etc.
- Rapid curing properties. Allows adhering operation immediately after applying.
- Can be used for all instantaneous adhesives in the ThreeBond 1700 series.
Application
- For adhesion of polypropylene, polyethylene, polyacetal and EPT rubber, which were considTo eliminate such pre-treatment operation and to enhance adhesion performance.
Package size & Color
250gm
ThreeBond 3013B
ThreeBond 3013B is a solvent-free UV curable adhesive with acrylic resin as its main ingredient. Since it is a single component resin, operations, such as measuring, mixing and defoaming, are not necessary, and the resin will cure quickly when it is irradiated with UV light of 200 to 400 nm. The use of this resin will speed up the production lines and promote energy conservation.
Features
- Cures in seconds to several tens of seconds under irradiation with UV light.
- Colored to visually indicate the state of application.
- Excellent adhesion to various substrates.
- After curing, it becomes a flexible cured material.
Application
- Securing of optical parts.
- Bonding, potting and sealing of electronic parts.
Package size & Color
250gm, 1kg
ThreeBond 3921, ThreeBond 3926
ThreeBond 3921 (base resin) and ThreeBond 3926 (hardener) is a two-component, acrylic type structural adhesive. It can cure and give the practical strength within 15 minutes. For normal acrylic base adhesive, the acrylic monomer will give off an odour, which makes the working environment undesirable. So ThreeBond 3921, ThreeBond 3926 is improved to reduce the odor and hence, make the working environment more pleasant.
Features
- Bonds to different types metal, plastic and other materials, despite of coverage area.
- Good initial strength, which enables the process to continue without sacrificing speed and productivity.
- Mixing ratio is ideally 1:1. However, it does not require accurate weighing to obtain the desired effect. It can bond without mixing. Hence, it is easier to work with than epoxy resin.
- The cured material is able to balance the various shear and peel strengths and impact resistance, resulting in better endurance.
- Low odor and does not contain any solvent, makes the product working, and environment friendly.
Application
- Bonding of speaker magnet or other types of ferrite.
- Bonding of aluminium, stainless steel plates.
- Bonding of FRP to ceramic, concrete to steel plate, tiles, etc.
Package size & Color
1kg
ThreeBond 3732
ThreeBond 3732 uses a metallic alkoxide binder to afford the final adhesive with good water resistance, electrical properties and sealing ability. This helps to enlarge the use of such adhesive into other applications, previously deemed impossible. ThreeBond 3732 can be used as a thick coating, with high filler loading.
Features
- Good workability.
- Eliminate the influence of acid or base.
- Water resistance.
- Excellent dielectric properties.
- Air-tightness.
Application
- Bonding of ceramic, glass or metal.
- Coating or potting of sensor or elements.
- Sealing of heater.
- Fixing of electronic and electrical parts near heat-emitting source.
- Fixing or potting of spark plug.
- High temperature parts.
- Bonding of heat resistant thermoset.
- Anti-corrosive coating.
- Coating against carbon or sludge.
- For other parts with requirements of heat resistance, organic solvent resistance or weather resistance.
