Engine
Electronic Control Unit
ECU and Battery
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum eleifend luctus tortor, nec semper turpis porttitor non. Donec tincidunt imperdiet lacinia. Etiam efficitur magna diam. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Vestibulum eleifend luctus tortor, nec semper turpis porttitor non. Donec tincidunt imperdiet lacinia. Etiam efficitur magna diam
TB1160 - RTV silicone sealant
- Dealcoholized and less corrosive to metals Non-sag product (Type with reduced sagging).
- Non-silicone product not intentionally containing low molecular weight siloxanes (D4-D10).
- Not intentionally containing organotin compounds (Complying with the REACH Regulation).
TB1225C
- Cell heat radiation.
- Good electrical properties.
- Low molecular cyclic siloxane reduced product.
TB1153E
- Liquid Electrolyte sealing by heat curing method.
- Good resistant to liquid electrolyte.
- Low moisture permeability.
Developed Products-1 Non-silicone sealant (Flame retardant grade) 11R-0047-X09
Battery Pack Case sealing
The sealant used around the automotive battery is required not only to be highly adaptable to the displacement of flanges, but also to have flame resistance equivalent to UL94V-0 as a measure to prevent vehicle fire.
- One-component moisture cure type
- Heat resistance
- High elongation
- Flame resistance equivalent to UL94 V-0
- Adaptable for main countries environment regulation.
Case Sealing application
TB1226 (Moisture Curing)
For good adhesion, Tin free, Low molecular cyclic siloxane reduced product.
TB1234B (Heat Curing)
For good durability, Good Adhesion & good flowability
TB3081J & TB3166 (UV Curing)
Low compression, permeant deformation & suitable for reworking
Screw fixing application
TB2400 series
Good durability, low & high strength available for locking, sealing of screws.
Connector Sealing application
TB3160 (UV Cure)
Good Sealing, durability and adhesion
TB2200 (Heat curing)
Good Adhesion and durability
TB2200 (Heat curing)
Good Adhesion and durability
Inverter/Converter
Invertor for E mobility
Reactor Coil
Capacitor
TB1200 – RTV silicone sealant
Dealcoholized and less corrosive to metals
Non-sag product (Type with reduced sagging)
Non-silicone product not intentionally containing low molecular weight siloxanes (D4-D10)
Not intentionally containing organotin compounds (Complying with the REACH Regulation)
TB3181J UV Curing
Good durability
Low compression permeant deformation
Reworking awailable
ย
TB1225C
Cell heat radiation
Good electrical properties
Low molecular cyclic siloxane reduced product
ย
TB2222P
Single component epoxy
Good solider heat resistant
Good durability & good adhesion
ย
Fuel Cell
TB3178 in the fuel cell and perform the vital function of water sealing application around the electrolyte membrane (MEA).
Considering the place of use and mass productivity,
We developed UV curable gasket with water-based chemical resistant
and high barrier properties.
TB1153E can be used in fuel cells that can withstand the curing temperature of 130*C. Certain cells have operating temperatures of up to only 70*C, beyond which the electrolyte gets damaged due to heat exposure. In such cases alternate products are required
Both these products are also used for preventing leaks along the water flow channels.
Rotor Core Magnet Bonding
Dispense ThreeBond 2280H (Liquid type) on the magnet parts and drying, or transcribe ThreeBond 1652 (Sheet type) on it.
TB2280H Liquid Type
TB1652 Sheet Type
Possible to expand to approx. 4 times of the resin’s original thickness and adhere
Feature
Possible to separate the adhesive application process and the volume expansion process
Excellent ATFยฎ resistance
(Thermal Conductivity Grade) 11R-0026-X04
Non-silicone sealant for Automotive
Electronic Components
One-component RTV
Heat resistant and flexible cured products
ย
Non Restricted Substances๏ผTin free and cyclic siloxane-free โป
Long Life Coolant resistance at 120โ
85โ85%RH resistance
Automotive electronics
Gear Transmission for EVใHV
Anaerobic adhesive-1
How to use , Features
Air shutoff
Contact with a metal
Moderate temperature and humidity
ย
Advantage
1) Fixing the bolt, plug and so on.
2) Preventing them from loosening
Improving quality
ย
Elastic adhesive
TB1535C
Features
Elastic adhesives form a tough,
flexible rubber-like elastic body after curing
Not contain low-molecular siloxane
It can be used for Electric parts
TB1539
Features
Low-temperature curing / Fast curing
In 1 min or more at approx. by 60 โ
Cured material has elasticity in wide temperature
It is around -35โ to 100โ.
Concerning for environmental aspects
Use of Plant-derived polymer as main component
ย
Advantage
- Absorbs external pressure of vibration and impact.
- Disperses the internal pressure from the substrate.
- It can be used with confidence in a wide range of fields.
ย
Epoxy Resin
- Absorbs external pressure of vibration and impact.
- Disperses the internal pressure from the substrate.
- It can be used with confidence in a wide range of fields.
Advantage
1)Excellent mechanical strength
2)Excellent resistance to heat and chemicals
3)Excellent adhesive strength
4)Low curing contraction
